メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

手順6に変更

lawrencealdさんによる編集

承認の保留中

変更なし

手順ライン

[* black] Similarly, the lower bezel can be easily pried up from body of the Streak. Screwdriver users need to be careful not to cut the ribbon cable underneath.
[* black] Similarly, the lower bezel can be easily pried up from body of the Streak. Screwdriver users need to be careful not to cut the ribbon cable underneath.
[* icon_caution] The capacitive control circuitry is securely attached to the inner face of the lower bezel. Since the connector is inside the device, it's a good idea to leave the bezel attached for now.
[* red] After a bit of digging, the five T5 Torx screws securing the rear case can be removed.