メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

手順3に変更

Jake Devincenziさんによる編集

承認の保留中

変更なし

手順ライン

[* black] Disconnect the 13 indicated cables, removing tape as necessary.
[* blackicon_note] When re-installing the board, make sure the two small connectors at the right hand side are above the board before inserting the screws.
[* blackicon_note] When re-installing the board, make sure the two small connectors at the right hand side are above the board before inserting the screws.