メインコンテンツにスキップ

手順2に変更

Matthew Newsomさんによる編集

承認の保留中

変更なし

手順ライン

-[* icon_note] Orient the Xbox 360 S so that the hard drive port is facing up and the front panel is facing to the left.
+[* icon_note] Orient the Xbox 360 S so that the hard drive port is facing up and the faceplate is facing to the left.
[* black] Insert a metal spudger between the black bottom vent and the silver rim of the bottom bezel, in the rear right corner of the vent.
[* black] Rotate the spudger away from the console, prying the vent up from the bottom bezel.
[* icon_note] Be sure to rotate the spudger far enough so that the clips on the vent are lifted past the silver rim of the bottom bezel.