メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

手順4に変更

Rob Cranleyさんによる編集

承認の保留中

変更なし

手順ライン

[* black] Like the iPhone 3G and 3GS, there are two silver [product|IF145-006|Phillips #00] screws at the bottom of the phone. Note: newer iPhone 4 handsets use 5-point "pentalobe" screws instead, requiring the use of a special screwdriver.
[* black] Like the iPhone 3G and 3GS, there are two silver [product|IF145-006|Phillips #00] screws at the bottom of the phone. Note: newer iPhone 4 handsets use 5-point "pentalobe" screws instead, requiring the use of a special screwdriver.
[* black] In a departure from the design of the 3G and 3GS, removing the screws releases the rear case, not the front glass.
[* black] This design makes switching out the rear panel trivial, but unfortunately means that [[Topic:iPhone 4|replacing the iPhone 4 front panel]] will likely be rather challenging.