メインコンテンツにスキップ

手順 2 への変更

- Michael Ebertによって編集

承認済みの編集 : Michael Ebert

削除
追加
変更なし

手順ライン

[title] Removing the back panel
[* red] Remove the six 9.5 mm #2 phillips screws.
[* black] Unplug the red and black cable from the tan circuit board.
[* black] Using both hands, unlock the plastic back panel from the metal clasps (located on the sides of the unit) by pulling the plastic away from the metal.
[* black] Slide the back panel toward you and off of the unit.