メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

手順2に変更

Jacob Pugsleyさんによる編集

承認済みの編集 : Jacob Pugsley

変更なし

手順ライン

[* black] Remove screws from the battery area, noting the following:
[* green] These screws are on oversize clearing holes, but hold other components on the keyboard. You can removeIt is not recommended to remove them now, but you'll have parts loose and dropping out if you remove the keyboard, so you may want to waityet.
[* green] These screws are on oversize clearing holes, but hold other components on the keyboard. You can removeIt is not recommended to remove them now, but you'll have parts loose and dropping out if you remove the keyboard, so you may want to waityet.
[* orange] Two screws secure the optical drive: one in the battery compartment and one in the RAM compartment.
[* blue] With the screws removed, PUSH out thethe optical drive thruout through the opening at the BLUE arrow. You will need to remove the drive in order to have access to 2two more screws at the edge of the frame in the opening of the optical drive attached to the bezel of the keyboarddrive.
[* blue] With the screws removed, PUSH out thethe optical drive thruout through the opening at the BLUE arrow. You will need to remove the drive in order to have access to 2two more screws at the edge of the frame in the opening of the optical drive attached to the bezel of the keyboarddrive.