Skip to main content

Changes to Step #2

Edit by Andrew Bookholt

承認の保留中

Deleted
Added
Unchanged

Step Lines

[* black] Use the flat end of a spudger to pry the front display bezel off the top edge of the display assembly.
[* icon_note] It may be helpful to insert and twist the flat end of your spudger to enlarge the gap between the front & rear display bezels as you work your way around the edge of the display.
[* black] Continue separating until the top edge of the front display bezel is free from the display assembly.
[* icon_caution] Be careful when prying near the iSight camera board, as it has exposed circuitry and is delicate.