手順1に変更
- David Hodsonによって編集
- 前
- 後
- 変更なし
手順ライン
| - | [* black] Disconnect the speaker cable from its socket on the speaker board prying straight up from the board with a spudger. |
|---|---|
| - | [* black] Disconnect the speaker cable from its socket on the logic board as done above. |
| - | [* red] Remove the speaker cable by pulling it horizontally out of the clips holding it in. |
| + | [* black] Use a spudger to pry the speaker cable connectors off of the logic board and the speaker board. |
| + | [* red] Remove the speaker cable by pulling it out of the metal clips along the side of the front case. |