メインコンテンツにスキップ

手順 11 への変更

- Stacey McKennaによって編集

承認の保留中

削除
追加
変更なし

手順ライン

[* black] The next step is to remove the FM/AM radio receiver pictured in image one.
[* black] First unsnap it from the tab that holds it to the mother board (see image two).
[* black] Second, disconnect the electrical strip as seen in image threethree by pulling the tabs on the plastic piece of the electric strip.
[* black] Remove the black cable from the side slot
.
[* black] Second, disconnect the electrical strip as seen in image threethree by pulling the tabs on the plastic piece of the electric strip.
[* black] Remove the black cable from the side slot
.