メインコンテンツにスキップ

手順 10 への変更

- Hunter Dunnによって編集

承認の保留中

削除
追加
変更なし

手順ライン

[* icon_caution] Before replacing the motherboard, it is crucial to understand that this device cannot be taken apart any further without breaking solder points. So the motherboard, screen and power supply must be replaced together.
[*
black] To removeRemove the remaining connected components, removeback unsnapping the 10 screws with a philips head screwdriver picturedtabs as shown in imagesimage one and two and liftseparating it from the components offmain body.
[* icon_note] Note that there are another set of tabs located on the opposite side of
the back case.
[* black] Reassemble the device by following these steps in reverse order
panel.
[* icon_caution] Before replacing the motherboard, it is crucial to understand that this device cannot be taken apart any further without breaking solder points. So the motherboard, screen and power supply must be replaced together.
[*
black] To removeRemove the remaining connected components, removeback unsnapping the 10 screws with a philips head screwdriver picturedtabs as shown in imagesimage one and two and liftseparating it from the components offmain body.
[* icon_note] Note that there are another set of tabs located on the opposite side of
the back case.
[* black] Reassemble the device by following these steps in reverse order
panel.

画像1

古いバージョン

新しいバージョン

画像2

削除