メインコンテンツにスキップ

手順 8 への変更

- Stacey McKennaによって編集

承認の保留中

削除
追加
変更なし

手順ライン

[* yellow] To removeRemove electronic strips on the right, bottom center, top center, and a cable on the left side of the input board (boxedboard.
[* black] Remove two screws shown
in figure one) first removeimage ^^74754. Remove the electronic strips (circled in figure one) that connect it togray connector on top of the logicinput board.
[* violet] Next, unclipuse a flat head screwdriver to assist you in prying the right clip while simultaneously pulling up on the input board. Unclip the component from the logic board as shown in image oneboard.
[* yellow] To removeRemove electronic strips on the right, bottom center, top center, and a cable on the left side of the input board (boxedboard.
[* black] Remove two screws shown
in figure one) first removeimage ^^74754. Remove the electronic strips (circled in figure one) that connect it togray connector on top of the logicinput board.
[* violet] Next, unclipuse a flat head screwdriver to assist you in prying the right clip while simultaneously pulling up on the input board. Unclip the component from the logic board as shown in image oneboard.
[* icon_note] Note that there is a clip on both the left and right sides of the input board.