メインコンテンツにスキップ

手順 8 への変更

- Hunter Dunnによって編集

承認の保留中

削除
追加
変更なし

手順ライン

[* yellow] To remove the input board (boxed in figure one) first remove the electronic strips (circled in figure one) that connect it to the logic board.
[* blackviolet] Next, unclip the component from the logic board as shown in image one.
[* blackviolet] Next, unclip the component from the logic board as shown in image one.
[* icon_note] Note that there is a clip on both the left and right sides of the input board.
[* blue] The slot that appears to already be removed is the one to the front panel and it is optional to be removed.

画像1

古いバージョン

新しいバージョン

画像2

削除