メインコンテンツにスキップ

手順 9 への変更

- Stacey McKennaによって編集

承認の保留中

削除
追加
変更なし

手順ライン

[* black] In order to remove the DVD video processor, first locate and remove the two screws with a phillips head screwdriver circled in image one.
[* yellow] Next, unplug the electronic strip connection boxed in in image one that connects it to the motherboard.
[* black] In order to remove the DVD video processor, first locate and remove the two screws with a phillips head screwdriver circled in image one.
[* yellow] Next, unplug the electronic strip connection boxed in in image one that connects it to the motherboard.
[* green] The final step is popping of the component off of the three nodes circled in image three.
[* green] Unfortunately one or more of these 'nodes' will probably be difficult to remove and you will just have to pull on it until they come unattachedunattached or rotate the component to unhinge from the plastic clip.
[* green] Unfortunately one or more of these 'nodes' will probably be difficult to remove and you will just have to pull on it until they come unattachedunattached or rotate the component to unhinge from the plastic clip.