Skip to main content

Changes to Step #6

Edit by Andrew Bookholt

承認の保留中

Deleted
Added
Unchanged

Step Lines

[* red] Remove the two 8 mm Phillips screws securing the Bluetooth/camera cable retainer to the upper case.
[* icon_note] One of the screws may remain captive in the Bluetooth/camera cable ground loop. If replacing the display, be sure to transfer this screw to the new unit.
[*
black] Removing airport screws, lifting airportLift the AirPort board/cable retainer assembly out of the upper case.
[* red] Remove the two 8 mm Phillips screws securing the Bluetooth/camera cable retainer to the upper case.
[* icon_note] One of the screws may remain captive in the Bluetooth/camera cable ground loop. If replacing the display, be sure to transfer this screw to the new unit.
[*
black] Removing airport screws, lifting airportLift the AirPort board/cable retainer assembly out of the upper case.