メインコンテンツにスキップ

手順5に変更

Andrew Bookholtさんによる編集

承認の保留中

削除済み
追加
変更なし

手順ライン

[* black] disconnecting airport cablesUse the flat end of a spudger to carefully pry the AirPort antenna off its socket on the AirPort card.
[* black] Disconnect the Bluetooth cable by pulling the male end straight away from its socket.
[* icon_caution] Pull the connector parallel to the face of the logic board, not straight up.
[* black] disconnecting airport cablesUse the flat end of a spudger to carefully pry the AirPort antenna off its socket on the AirPort card.
[* black] Disconnect the Bluetooth cable by pulling the male end straight away from its socket.
[* icon_caution] Pull the connector parallel to the face of the logic board, not straight up.