メインコンテンツにスキップ

手順4に変更

Andrew Bookholtさんによる編集

承認の保留中

削除済み
追加
変更なし

手順ライン

[* black] Insert wisdom hereRemove the following four screws securing the hard drive and IR sensor cable to the upper case:
[* red] Two 1.5 mm Phillips screws.
[* orange] Two 4 mm Phillips screws.
[* black] Slide the hard drive and IR sensor bracket away from the edge of the upper case.
[* black] Carefully peel the hard drive and IR sensor cable from the upper case.
[* black] Remove the hard drive/IR sensor cable from the upper case and set it aside
.
[* black] Insert wisdom hereRemove the following four screws securing the hard drive and IR sensor cable to the upper case:
[* red] Two 1.5 mm Phillips screws.
[* orange] Two 4 mm Phillips screws.
[* black] Slide the hard drive and IR sensor bracket away from the edge of the upper case.
[* black] Carefully peel the hard drive and IR sensor cable from the upper case.
[* black] Remove the hard drive/IR sensor cable from the upper case and set it aside
.