メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

手順2に変更

Eric Essenさんによる編集

承認の保留中

削除済み
追加
変更なし

手順ライン

[* blackred] Remove the single black Torx screw that fastens the display cable to the plastic casing.
[* blackred] Remove the single black Torx screw that fastens the display cable to the plastic casing.
[* black] Grasp the thin display inverter board at its left end; lift up and rotate toward yourself.
[* icon_note] There are two tabs that hold the display inverter in place; these are what you need to get past in order to pull the board free.