メインコンテンツにスキップ

手順 3 への変更

- John Udallによって編集

承認の保留中

削除
追加
変更なし

手順ライン

[* black] When placing the keys back into the faceplate you have to make sure that they are going in the right direction.
[* yellow] You can tell which way is up by a semicircular extrusion on the back of a key. If this extrusion is on the left half of the key then the key is facing up.
[* green] The gray and blue keys have the extrusion on the upper right holeleft hole looking at the back of the key.
[* violet] The black keys on the other hand have the extrusions on the lower right holeleft hole looking at the back of the key.
[* yellow] You can tell which way is up by a semicircular extrusion on the back of a key. If this extrusion is on the left half of the key then the key is facing up.
[* green] The gray and blue keys have the extrusion on the upper right holeleft hole looking at the back of the key.
[* violet] The black keys on the other hand have the extrusions on the lower right holeleft hole looking at the back of the key.