メインコンテンツにスキップ

手順 2 への変更

- andreaceroによって編集

編集が拒否されました。 : Scott Havard

削除
追加
変更なし

手順ライン

[* black] Remove the following 3 screws from the rear wall of the battery compartment:
[* red] Two 34 mm Phillips #00. (A1181 has three 3 mm screws and one 4 mm.)
[* orange] One 43 mm Phillips #00 on the right side.
[* red] Two 34 mm Phillips #00. (A1181 has three 3 mm screws and one 4 mm.)
[* orange] One 43 mm Phillips #00 on the right side.
[* icon_reminder] When reinstalling these screws, press gently on the lower case to line up the screw holes.