メインコンテンツにスキップ

手順 2 への変更

- Suriによって編集

編集が拒否されました。 : Jake Devincenzi

削除
追加
変更なし

手順ライン

[* black] Remove the following 3 screws from the rear wall of the battery compartment:
[* red] Two 3 mm Phillips #00. (In some cases two 4mm)
[* orange] One 4 mm Phillips #00 on the right side. (In some cases one 3mm, see above)
[* red] Two 3 mm Phillips #00. (In some cases two 4mm)
[* orange] One 4 mm Phillips #00 on the right side. (In some cases one 3mm, see above)
[* icon_reminder] When reinstalling these screws, press gently on the lower case to line up the screw holes.