メインコンテンツにスキップ

手順 2 への変更

- Andrew Optimus Goldheartによって編集

承認済みの編集 : Andrew Optimus Goldheart

削除
追加
変更なし

手順ライン

[* black] Remove the following 3 screws from the rear wall of the battery compartment:
[* red] Two 3 mm Phillips #00.
[* orange] One 4 mm Phillips #00 on the right side.
[* icon_reminder] I found that the image is incorrect on this step. The 3 mm screw is in the center. WhenWhen reinstalling these screws, it may be helpful to push downpress gently on the lower case to line up the screw holes.
[* icon_reminder] I found that the image is incorrect on this step. The 3 mm screw is in the center. WhenWhen reinstalling these screws, it may be helpful to push downpress gently on the lower case to line up the screw holes.