メインコンテンツにスキップ

手順 2 への変更

- Mary Waltersによって編集

承認の保留中

削除
追加
変更なし

手順ライン

[* black] Remove the following 3 screws from the rear wall of the battery compartment:
[* red] Two 3 mm PhillipsPhillips.Long on the outside.
[* orange] One 4 mm Phillips on the right side. Short in the middle.
[* red] Two 3 mm PhillipsPhillips.Long on the outside.
[* orange] One 4 mm Phillips on the right side. Short in the middle.
[* icon_reminder] When reinstalling these screws, it may be helpful to push down on the lower case to line up the screw holes.