メインコンテンツにスキップ

手順6に変更

Andrew Bookholtさんによる編集

承認の保留中

変更なし

手順ライン

+[* black] Insert the flat end of a spudger between the front bezel and the plastic strip attached to the rear bezel near the screw holes at the bottom corners of the display.
+[* black] Rotate your spudger toward the rear bezel to separate it from the front bezel.
+[* icon_reminder] If necessary, continue separating the left edge of the rear bezel off the tabs on the front display bezel.