メインコンテンツにスキップ

手順5に変更

bastedoさんによる編集

承認の保留中

変更なし

手順ライン

-[* black] From both hinges, remove two Torx T6 screws from either side of the row of screws, leaving two remaining in the middle. On each side, the two screws closer to the edge of the computer are shorter than the two screws closer to the center of the computer. There are 8 screws total.
+[* black] From each complete hinge assembly, remove two Torx T6 screws from the outside of each set, leaving two remaining in the middle of each hinge. On each side, the two screws closer to the edge of the computer are shorter than the two screws closer to the center of the computer. Then remove the two inner screws from each hinge assembly. There are 8 screws total.

画像1

以前の画像はありません

追加