メインコンテンツにスキップ

手順 2 への変更

- Oscarによって編集

承認済みの編集 : Oscar

削除
追加
変更なし

手順ライン

[title] Removing the plastic ring.
[* black] Use the plastic opening tool to remove the black ring from the speaker. This will allow you to access the screws on the metal ring.
[* black] Congratulations, you now have access to the rest of the speaker! Stay tuned for instructions concerning
[* icon_note] '''For reassembly
the reconstructionblack ring cannot snap back into the speaker the way it was disassembled. It must first, go inside the black lip of the ear cushion. The black lip is located on the back side of the ear cushion. Please refer to the last two pictures on this component.step. '''
[* black] Repeat forred] The black lip located on the otherback side of the headphonesear cushion.
[* black] Congratulations, you now have access to the rest of the speaker! Stay tuned for instructions concerning
[* icon_note] '''For reassembly
the reconstructionblack ring cannot snap back into the speaker the way it was disassembled. It must first, go inside the black lip of the ear cushion. The black lip is located on the back side of the ear cushion. Please refer to the last two pictures on this component.step. '''
[* black] Repeat forred] The black lip located on the otherback side of the headphonesear cushion.

画像2

以前の画像はありません

追加

画像3

以前の画像はありません

追加