この手順に変更
- Robert Croninによって編集
- 前
- 後
- 変更なし
手順ライン
| + | [* black] Approaching from the “outer” face of the front panel, place the large metal ring on the trackball housing. There are three sets of prongs, so that it will only fit in one way. The side of the large metal ring without any prongs should be oriented towards the top of the phone. You may need to use the spudger to snap it firmly into place. |
|---|
画像1
以前の画像はありません
追加
画像2
以前の画像はありません
追加