メインコンテンツにスキップ

手順 3 への変更

- John Thressによって編集

承認の保留中

削除
追加
変更なし

手順ライン

[* icon_note] NOTE: This picture identifiesis simply used to identify the processaction required to release the electrical ribbonsribbons, but not the proper location for this step.
[* icon_note] NOTE: This picture identifiesis simply used to identify the processaction required to release the electrical ribbonsribbons, but not the proper location for this step.
[* black] This step applies to the larger electrical ribbon connecting the LCD screen and circuit board.
[* black] Using a spudger, wedge the flat tipped end between the black bar and the circuit board.
[* black] Carefully flip uplift the black bar into the vertical position.
[* black] Carefully flip uplift the black bar into the vertical position.