メインコンテンツにスキップ

手順 6 への変更

- mayerによって編集

承認の保留中

削除
追加
変更なし

手順ライン

[* black] Remove the following 10 screws from the bottom case:
[* red] Three 1.7 mm Phillips from the front edge of the battery compartment.
[* orange] One 3.9 mm T8 Torx to the right of the memory card.
[* yellow] One 6.9 mm T8 Torx at the left edge of the memory compartment.
[* green] Three 12.4 mm fully threaded Phillips from the center of the row of screws along the back edge of the case.
[* blue] Two 15.1 mm 2.5 mm threaded Phillips, one from either end of the row of screws along the back edge of the case.
[* green] Three 12.4 mm fully threaded Phillips from the center of the row of screws along the back edge of the case.
[* blue] Two 15.1 mm 2.5 mm threaded Phillips, one from either end of the row of screws along the back edge of the case.