Skip to main content

Changes to Step #5

Edit by Dave Crosby

編集が拒否されました。 by Sam Goldheart

Deleted
Added
Unchanged

Step Lines

[* black] Pry up the antenna on the communications board with a [product|IF145-002|plastic opening tool]. This is one of two antennas on the communications board.
[* black] The communications board is secured by T4T5 Torx screws.
[* black] The communications board is secured by T4T5 Torx screws.
[* black] Upon removing the screws, the communications board slides out of its socket on the logic board. The connection socket style is similar to a Mini PCI Express card.