メインコンテンツにスキップ

手順5に変更

David Hodsonさんによる編集

承認の保留中

削除済み
追加
変更なし

手順ライン

[* black] Pry up the antenna on the communications board with an [product|IF145-002|iPoda [product|IF145-002|plastic opening tool]. This is one of two antennas on the communications board.
[* black] Pry up the antenna on the communications board with an [product|IF145-002|iPoda [product|IF145-002|plastic opening tool]. This is one of two antennas on the communications board.
[* black] The communications board is secured by T4 Torx screws.
[* black] Upon removing the screws, the communications board slides out of its socket on the logic board. The connection socket style is similar to a Mini PCI Express card.