メインコンテンツにスキップ

この手順に変更

- Andrew Groeneveldによって編集

承認済みの編集 : Andrew Groeneveld

削除
追加
変更なし

手順ライン

[* black] There are two screws (Phillips #000, 2.0 mm long) holding in the circuit board. Use the suggesteda Phillips #000 screwdriver to take out those screws.
[* black] There are two screws (Phillips #000, 2.0 mm long) holding in the circuit board. Use the suggesteda Phillips #000 screwdriver to take out those screws.