メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

手順32に変更

Jaimeさんによる編集

承認済みの編集 : Jaime

変更なし

手順ライン

[* black] Starting in the optical drive area, slide the plastic opening tool under the top cover, prying up each side to loosen it from the computer.
[* black] Remove three screws where the switch cover meets the display assembly area. The two on the outsides are 5mm long and the heads are 4 mm wide. The one in the middle is 5 mm long and the head is 4 mm wide.
[* icon_note]
If you are having a hard time removing the cover, turn the computer over to ensure you remove all screws as mentioned in previous steps.
[* black] Remove three screws where the switch cover meets the display assembly area. The two on the outsides are 5mm long and the heads are 4 mm wide. The one in the middle is 5 mm long and the head is 4 mm wide.
[* icon_note]
If you are having a hard time removing the cover, turn the computer over to ensure you remove all screws as mentioned in previous steps.