メインコンテンツにスキップ

手順6に変更

iRobotさんによる編集

承認済みの編集 : iRobot

変更なし

手順ライン

+[* black] Then go underneath the car and loosen the clamp on the lower radiator hose where it connects to the radiator.
+[* black] Remove the hose in the same manner you did the upper hose.
+[* black] Now replace both hoses, and secure with hose clamps. Replace the hose clamps with new ones if they were difficult to open due to corrosion or stripped screw heads.
+[* black] Finish by filling the system with coolant and bleeding the system as [guide|21437|described in the coolant change guide.]

画像1

以前の画像はありません

追加