メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

手順1に変更

Ashley Tornioさんによる編集

承認済みの編集 : Ashley Tornio

変更なし

手順ライン

[* red] LoosenUsing a Torx-Security T-15 screw driver, loosen the screws on opposite corners a little at a time withevenly on each screw (process described below):
[* black] This process is done by slightly unscrewing
a Torx-Security T-15 screw driverat one corner and moving to the screw at the diagonal corner next to unscrew slightly.
[* black] Then move to the opposite corners and repeat the process.
[* black] Continue until all of the screw are completely removed
.
[* red] LoosenUsing a Torx-Security T-15 screw driver, loosen the screws on opposite corners a little at a time withevenly on each screw (process described below):
[* black] This process is done by slightly unscrewing
a Torx-Security T-15 screw driverat one corner and moving to the screw at the diagonal corner next to unscrew slightly.
[* black] Then move to the opposite corners and repeat the process.
[* black] Continue until all of the screw are completely removed
.
[* icon_caution] Remember to loosen opposite corners first to equalize the pressure on the springs. Do not completely unscrew one screw at one time. Unscrew each screw a little at a time.