メインコンテンツにスキップ

手順 3 への変更

- Sarahによって編集

承認済みの編集 : Sarah

削除
追加
変更なし

手順ライン

[* black] Keep holding the partially separated panel open. It's easiest to do this by wedging a spudger into the opening but can also be held open by your hands.
[* red] Rotate the Xbox to the left to locate the clip connecting the front panel to the body.
[* black]
Insert the spudger inside the gap to release the clip. This may require some wiggling of the spudger. The clip will pop off, making the front panel looser.
[* red] Rotate the Xbox to the left to locate the clip connecting the front panel to the body.
[* black]
Insert the spudger inside the gap to release the clip. This may require some wiggling of the spudger. The clip will pop off, making the front panel looser.