メインコンテンツにスキップ

手順 3 への変更

- Jenniferによって編集

承認済みの編集 : Jennifer

削除
追加
変更なし

手順ライン

[* black] Keep holding the partially separated panel, and you will findpanel open. Its easiest to do this by wedging a clip onspudger into the crease but can also be held open by your hands.
[* red] Rotate the Xbox to
the left side.to locate the clip connecting the front panel to the body.
[* black]
Insert the spudger inside and the gap to release the clip. This may require some wiggling of the spudger. The clip will pop off, letting the front panel come off.
[* black] Keep holding the partially separated panel, and you will findpanel open. Its easiest to do this by wedging a clip onspudger into the crease but can also be held open by your hands.
[* red] Rotate the Xbox to
the left side.to locate the clip connecting the front panel to the body.
[* black]
Insert the spudger inside and the gap to release the clip. This may require some wiggling of the spudger. The clip will pop off, letting the front panel come off.

画像1

以前の画像はありません

追加

画像2

以前の画像はありません

追加

画像3

以前の画像はありません

追加