メインコンテンツにスキップ

手順 3 への変更

- Kevinによって編集

承認済みの編集 : Kevin

削除
追加
変更なし

手順ライン

[* red] Flipping the toaster upside down, use a T7 Torx Screwdriver to remove the four 10mm screws that keep the outer shell attached.
[* orange] Flip the toaster back over and slide off the shell making sure to slip the toaster lever (now without the black plastic nub) through the lever opening in the shell.
[* blackicon_note] The outer shell should now only be connected by its internal wiring.
[* blackicon_note] The outer shell should now only be connected by its internal wiring.