メインコンテンツにスキップ

手順 3 への変更

- Jacob M Bassettiによって編集

承認済みの編集 : Jacob M Bassetti

削除
追加
変更なし

手順ライン

[* black] Flipred] Flipping the toaster upsidedown.
[* red] Using
upside down, use a T7 torx screwdriver,screwdriver to remove the four 10mm screws that keep the outer shell attached.
[* black] Flipred] Flipping the toaster upsidedown.
[* red] Using
upside down, use a T7 torx screwdriver,screwdriver to remove the four 10mm screws that keep the outer shell attached.
[* orange] Flip the toaster back over and slide off the shell making sure to slide the toaster lever (now without the black plastic nub) through the lever opening in the shell.
[* black] The outer shell should now only be connected by its internal wiring.