メインコンテンツにスキップ

手順10に変更

Nicolas Siemsenさんによる編集

承認済みの編集 : Nicolas Siemsen

変更なし

手順ライン

[* black] Replace the spring, retainer and nut over the filter and tighten down. The spring should still have some room to expand and contract but should be snug.
[* red] Fill the reservoir to the bottom of the metal rim around the top of the pump housing.
[* black] This car is getting power steering fluid, instead of automatic transmission fluid. Both are OK. The power steering fluid is clear.
+[* black] Now, turn on the engine and turn the steering wheel left and right, as far as it will go, a few times to get out any air.
+[* black] Top off the fluid as needed. Never let the pump run dry.
+[* black] If your fluid is very dirty, simply repeat the process of sucking out fluid, putting the filter back in, and then filling it until it looks clean.