メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

手順9に変更

Devan Carlsonさんによる編集

承認済みの編集 : Devan Carlson

変更なし

手順ライン

[* black] To remove the back panel's second layer, there are nine screws in total that must be removed: four 12mm screws on the sides (outlined in red) and five 6mm screws at the top (outlined in orange).
[* red] First, use the Phillips #1 Screwdriver to remove the four 12mm screws.
[* orange] Then remove the five 6mm screws at the toptop with the same screwdriver.
[* orange] Then remove the five 6mm screws at the toptop with the same screwdriver.