メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

手順9に変更

iRobotさんによる編集

承認の保留中

変更なし

手順ライン

[* black] Place enough pressure on the upper case to allow you to slide a tool just within the seam between upper case and lower case as shown in the picture. A dentist's hook, push pin, or similar tool will work.
[* icon_note] Do not yank the upper case off as soon as you free the clasp. The case is attached to the logic board via two ribbon cables.
[* black] Delicately slip the tip of your tool behind the silver metal latch and pull it forward while pulling up on the case. This may take some effort.

画像1

以前の画像はありません

追加