手順7に変更
GadgetERService — さんによる編集
承認済みの編集 : GadgetERService
- 前
- 後
- 変更なし
手順ライン
[* black] Now that the motherboard is out, this is the screen/digitizer/LCD assembly. From here, we need to only remove the digitizer. |
[* black] We recommend using a heat gun or a hot plate if you have one. If you don't have either, use a blow dryer! |
画像1
以前の画像はありません
追加
画像2
以前の画像はありません
追加
画像3
以前の画像はありません
追加