メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

手順6に変更

Andrew Bookholtさんによる編集

承認の保留中

変更なし

手順ライン

[* black] Insert wisdom hereRepeat the above process for the other side of the resistor.
[* black] To complete the discharge tool, strip the ends of the wires.
[* icon_note] To discharge from small points, it may be helpful to cut the exposed ends of wire into a point shape and solder them to maintain the shape. Alternatively, the probes commonly used multimeters can be soldered to the wires to create a more precise discharge tool
.
[* black] Insert wisdom hereRepeat the above process for the other side of the resistor.
[* black] To complete the discharge tool, strip the ends of the wires.
[* icon_note] To discharge from small points, it may be helpful to cut the exposed ends of wire into a point shape and solder them to maintain the shape. Alternatively, the probes commonly used multimeters can be soldered to the wires to create a more precise discharge tool
.