Skip to main content

Changes to Step #1

Edit by Guy Patterson

承認の保留中

Deleted
Added
Unchanged

Step Lines

[* yellow] Clean the primary corona wire inside the drum unit by gently sliding the blue tab from rightall the way to left, then from left and then back to rightthe far right. Repeat several times.
[* icon_caution] BeMake sure to return the bluearrow on the tab back tolines up with the original position so thatarrow on the arrows line updrum unit before you place it back into the printer. If not returned to the original position, printed pages may havetab is in the wrong place, a vertical stripeline might appear on future print jobs.
[* yellow] Clean the primary corona wire inside the drum unit by gently sliding the blue tab from rightall the way to left, then from left and then back to rightthe far right. Repeat several times.
[* icon_caution] BeMake sure to return the bluearrow on the tab back tolines up with the original position so thatarrow on the arrows line updrum unit before you place it back into the printer. If not returned to the original position, printed pages may havetab is in the wrong place, a vertical stripeline might appear on future print jobs.