メインコンテンツにスキップ

手順4に変更

Tyrone Heさんによる編集

承認の保留中

変更なし

手順ライン

[* black] Now the connections from the board need to be removed.
-[* black] The two cables running out of the left side of the board can be simply pulled away by hand.
+ [* red] Remove the two cables running out of the left side of the board by using a pin to insert into the two small holes and pulling out.
+ [* icon_note] This part may be easier with two people.
+ [* icon_caution] Do not insert pin in hole with force or you risk damaging the connector.