メインコンテンツにスキップ

手順2に変更

Tyrone Heさんによる編集

承認の保留中

変更なし

手順ライン

-[* black] Now that the back panels have been removed, the metal backing needs to be removed as well.
- [* red] Remove the single screw at the top and the two screws at the bottom of the monitor with a #2 philips head screwdriver.
-[* black] With the screws removed the metal backing needs to be pushed towards the bottom of the monitor in order to release its clips and be pulled away.
+[* black] Remove the metal backing.
+ [* red] Remove the single screw at the top and the two screws at the bottom of the monitor with #2 philips head screwdriver.
+[* black] With the screws removed, push metal backing toward back of monitor to release its clips and pull away.