メインコンテンツにスキップ

手順2に変更

Dylan Perryさんによる編集

承認の保留中

変更なし

手順ライン

+[* black] Now that the back panels have been removed, the metal backing needs to be removed as well.
+[* black] To do so, use the #2 philips head screwdriver and remove the single screw at the top and the two screws at the bottom of the monitor.
+[* black] With the screws removed the metal backing needs to be pushed towards the bottom of the monitor in order to release its clips and be pulled away.

画像1

以前の画像はありません

追加