メインコンテンツにスキップ

手順4に変更

Maxさんによる編集

承認の保留中

削除済み
追加
変更なし

手順ライン

[* black] Lift the fan shroud and fan straight up and out. Take care to disconnect the indicated connector
[* black] Now slide the entire board back approximately 5mmRemove the heatsink clamps with a flathead screwdriver and lift it offdo the chassissame for the other side.
[* icon_caution] This can very difficult! It took us a great dealLift off the heatsink and remove the 4 screws of force to get the board loose. Take great care toCPU board.
[* black] There are 4 pins: remove the 3 pins near the RAM but
not damage the boardpin nearest You.
[* black] You are now ready to slide gently (and without ANY difficult) the motherboard. Lift up and the game is done
.
[* black] Now slide the entire board back approximately 5mmRemove the heatsink clamps with a flathead screwdriver and lift it offdo the chassissame for the other side.
[* icon_caution] This can very difficult! It took us a great dealLift off the heatsink and remove the 4 screws of force to get the board loose. Take great care toCPU board.
[* black] There are 4 pins: remove the 3 pins near the RAM but
not damage the boardpin nearest You.
[* black] You are now ready to slide gently (and without ANY difficult) the motherboard. Lift up and the game is done
.

画像2

以前の画像はありません

追加

画像3

以前の画像はありません

追加