メインコンテンツにスキップ

手順5に変更

Nicolas Siemsenさんによる編集

承認済みの編集 : Nicolas Siemsen

変更なし

手順ライン

[* black] Since the diaphragm was not torn on this actuator the diaphragm was removed, the actuator and diaphragm were cleaned with mild soap and water, and then the diaphragm was greased with synthetic grease such as dielectric.
+[* black] Removing this diaphragm is very similar to removing the ones on the early style door lock vacuum actuators. [guide|20147|Click here to see that guide for some tips on removing the diaphragm.|stepid=55945]