メインコンテンツにスキップ

手順7に変更

Arda Cetkenさんによる編集

承認済みの編集 : Kristen Gismondi

変更なし

手順ライン

-[* black] When pressing down on the keyboard the force must overcome the adhesive.
-[* black] When lifting out keyboard be mindfull on the keyboard flex, that need to be disconnected when keyboard is loose.
-[* blue] remove the flex'es by opening the connectors and remove them (5 in total).
-[* red] Remove 3 screws (marked Red)
-[* black] Finally the top cover can be removed with a spudger.
+[* black] When pressing down on the keyboard, make sure to use enough force to overcome the adhesive.
+[* black] When lifting out the keyboard be mindful of the keyboard's flex cables that need to be disconnected when the keyboard is loose.
+[* blue] Remove the flex cables by opening the connectors and removing them (there are 5 in total).
+[* red] Remove the three screws.
+[* black] Remove the top cover with a spudger.